Toyota Celica Supra 1986 Service And Repair Manual page 697

80·28
Part Name and Part No,
Butyl tape set
(00850 - 00065)
Oam kit
104681 - 1201 01
Materials required
BODY - Ouaner Win<low Glass
9. REMOVE FOLLOWING PARTS:
(a) Joint
cOYer
(b) Roof drip moulding
(c) Quarter window belt moulding
(d) Corner moulding
(e) Center pillar garnish
10. REMOVE QUARTER WINDOW GLASS
(a) Remove the glass retainers.
(b) Remove the glass set screws.
(c) Push piano w ire through from the interior.
(d) T ie both win! ends to a wooden block.
(e) Separate the glass by pulling the piano wire around it.
Remove the glass.
INSTALLATION OF QUARTER WINDOW
GLASS
1. PREPARE ITEMS LISTED
Content of Set
ButYl taPe 9 mm dia. x 150 mm (0.35 x 5.91 inJ
Primer 6 cc (0.17 fl. oz.)
Spon9t (for applying primer}
Piaoo wire 1 mm d ia. x 600 mm {0.04 x 23.62 in.) (fOt slicing off glass)
Dam
Oouble·stick ta~ (for sticking on dam)
Solvent (AlcohOl, unleaded gasoline) Cfor cleaning adhering surfaces)
2. CLEAN BODY AND GLASS
Wipe off any adhesive left on body and glass with alcohol
or unleaded gasol ine.