Toyota Celica Supra 1986 Service And Repair Manual page 493

BR-16
$
l
BRAKE SYSTEM - Front Brake
REMOVAL OF CYLINDER
(See page BR·14}
1. DISCONNECT BRAKE HOSE FROM BRAKE TUBE
AND CYLINDER
(a} Using SST and a spanner, disconnect the brake tube
from the hose.
SST 09751·36011
(b} Use a container to catch the brake fluid.
(c} Remove the clip from brake hose.
(d} Disconnect the brake hose from the cylinder.
2. REMOVE CYLINDER
3.
(a} Hold the sliding bushing and remove the cylinder
installation bol t.
(b} Lift up and push out the cylinder from the torque
plate pin.
REMOVE FOLLOWING PARTS:
(a}
Anti-squeal shim
(b}
Brake pads
(c}
Anti-rattle springs
(d}
Pad guide plates
(e}
Pad support plate
DI SA SSEMBLY OF CYLINDER
(See
page BR·14}
1. REMOVE SLIDING BUSHING AND BOOT