Toyota Celica Supra 1986 Service And Repair Manual page 514

SR-6
J
STEERING -Steering Column Assembly with Til! Steering
......
.....
DISASSEMBLY OF STEERING COLUMN ASSEMIIf
AND TILT MECHANISM
(See
page SR-5)
-
1. REMOVE IGNITION KEY CYLINDER
(a) Place the ignition key at the ACC position.
(b) Push down the stop key with a thin rod, and pull out
the key cyli nder .
2. REMOVE TENSION SPRINGS AND CORDS
(a) Fully tilt the main shaft upward.
(b) Pry the spring and remove the cord and spring .
3. DISCONNECT INTERMEDIATE SHAFT AND
MAIN
SHAFT
4.
(a) Place match marks on the intermediate shaft and
uno
versal joint.
(b) Remove the joint bolt.
(c) Remove the four bracket bolts.
(d) Separate the tilt mechanism from the oolumn tube.
DISCONNECT UPPER BRACKET FROM TILT
STEERING SUPPORT
(a) Remove the support reinforcement.
(b) Remove the three bolts and disconnect the brackl!l
from the support.
'
•