Toyota Celica Supra 1986 Service And Repair Manual page 339

AT-84
AUTOMATIC TRANSMISSION - Component Groupd (Front Clutch)
"'"
'""
.....
6. REMOVE THRUST BEARING AND RACES
Note the position of the races.
8. REMOVE DISC
7 . REMOVE THINNER SNAP RING
8 . REMOVE REMAINING CLUTCH PLATES AND DISCS
9 . COMPRESS PISTON RETURN SPRINGS AND REMO'Il
SNAP RING
Place SST on the spring retainer and compress the spring!
w ith
a shop press.
Remove the snap ring w ith a screwdriver.
SST 09350· 20013 (09369·20040)
10. REMOVE SPRING RETAINER AND EIGHTEEN SPRINGS
, ,
.
ASSEMBLE FRONT CLUTCH ON OVERDRIVE CASE AND
BLOW OUT PISTON
(a) Slide the front clutch onto the overdrive case.
(b) Apply compreued air to the ovardnve cesato re,....
the piston.
(If
the piston does not come out, use
pi.
ers to remove
it.l
(c) Remove the front clutch from the overdrive case.
1 2. REMOVE O·RINGS FROM PISTON
INSPECTION OF FRONT CLUTCH
1. INSPECT FRONT CLUTCH PISTON
(a) Check that the check ball is free by shaking the piston.
Air (bl Check that valve does not leak by applying
low·
pressure compressed air.