Toyota Celica Supra 1986 Service And Repair Manual page 331

AT
-56
AUTOMATIC TRANSMISSION - Component Groups !Overdrive Input Shaft and Clutch)
Af(l'l8t
4. REMOVE SNAP RING AND HUB FROM OVERDRIVE
CLUTCH ASSEMBLY
6. REMOVE THINNER SNAP RING, FLANGE, DISC AND
PLATE
6. COMPRESS PISTON RETURN SPRINGS AND REMOVE
SNAP RING
Place SST on the spring retainer and compress the springs
with
a
shop press. Using a screwdriver, remove the
snap
ring.
SST
09350-20013 (09369-20040}
1. REMOVE SPRING RETAINER AND EIGHTEEN SPRINGS
8. ASSEMBLE OVERDRIVE CLUTCH ON OIL PUMP AND
BLOW OUT PISTON
Ia) Slide the overdrive clutch onto the oil pump.
(b) Apply compressed air to the oil pump to remove the
piston.
llf
the p iston does not come out completety,
use needle· - nose p liers to remove
it .)
tc, Remove
the
overdrive
clutch
from
the
oil pump.
9. REMOVE CLUTCH PISTON 0-RINGS
10.
REMOVE SNAP RING FROM OVERDRIVE PLANETARY
GEAR ASSEMBLY
11. REMOVE THRUST WASHERS AND ONE-WAY CLUTCH
FROM PLANETARY GEAR ASSEMBLY
CAUTION:
11<1
careful not to lose the four plugs.
12. REMOVE FOUR PLUGS WITH MAGNETIC FINGER
CAUTION: Keep the four plugs together to prevent lo"
lng them.