Toyota Celica Supra 1986 Service And Repair Manual page 267

...
..
I
MANUAL TRANSMISSION - W58 Transmission MT-27
-
121 Insert No. 3 shift fork shalt through No. 3 shift
fork and the reverse shift arm.
(3) Align No. 3 shift fork with the No. 3 hub sleeve
groove. Put the reverse shift a.rm into the pivot
of bearing retainer and align the reverse shift arm
shoe with tho reverse idler gear groove . Install
No. 3 shift fork shalt to the intermediate plate.
{c) Install No. 4 shift fork shaft.
111 Push the pin, which was inserted Into the reverse
shift arm
hole.
into the groova of No. 3 shift fork
shaft •
(21 Install No. 4 shift fork shaft to the intennedista
plate over the reverse shift arm.
(d) Using a pin punch, drive in the slotted spring pin until
it is flush with tho fork.
{e) Apply MP grease to No. 3 interlock pin and install the
pin into the intermediate plate hole .