Toyota Celica Supra 1986 Service And Repair Manual page 310

AUTOMATIC TRANSMISSION - On-Vehicle Repair
AT-35
4 . INSTALL VALVE BODY BOLTS
Install the bolts as shown. Tighten the bolts evenly.
Torque:
100
kg-em (7ft-lb.
10
N·ml
6.
INSTALL OIL STRAINER
Be sure the strainer is clean. Torque the six bolts.
Torque:
56
kg-<:m
(48
in.-lb.
5.4
N •m)
6. WHEN REPLACING SOLENOID
lal For the No.
3
solenoid,
o
Install the solenoid into the bore.
• Tighten the two bolts.
Torque: 55 kg-em
{48
in.-lb. 6.4 N·m)
lbl For the No. 1 and 2 solenoids.
• M ake sure that the two valve spring are installed
correctly.
• Install the solenoid over the gasket and install the
center of the bolt .
o
Tighten the three bolts.
Torque:
100
kg-em (7
ft~b.
10
N·ml
7. CONNECT TWO CONNECTORS TO EACH SOLENOID
(a) Connect the two connectors to each solenoid.
(bl Clamp the solenoid wire.