Toyota Celica Supra 1986 Service And Repair Manual page 365

AT·90
•
AUTOMATIC TRANSMISSION - Component Groups !V alve Bo<fy)
-·
-·
3 . INSTALL N0.3 SOLENOID
(a) Install the No. 3 solenoid ont o the lower valve body.
(b) Temporarily tight en the bolt.
4 . INSTALL TWO VALVES
Ia) Install the low coast mo<fulator valve Into the
bore.
lbl Inst all the intermediate modulator valve into the ben.
6. INSTALL TWO VALVE SPRINGS
NOTE: Install the shon spring in the right bore .
6. INSTALL N0.1 AND N0.2 SOLENOIDS
Install the solenoid over the gasket .
Tighten the three bolts.
Torque: 100 kg-em (7 fHb, 10 N· m)
7. INSTALL PRESSURE RELIEF VALVE
(a) Pl ace the steel ball and spring onto the bo<fy.
(b) Install the retainer.
Torque: 55 kg-<:m (48 i n..Jb. 5.4 N·m)