Toyota Celica Supra 1986 Service And Repair Manual page 463

REAR AXLE AND SUSPENSION - Limited Slip Differential RA-41
(g) Install following parts onto the differential case.
• Adjusting wuher
• Thrust washer No.
2
• Thrust washer No.
3
• Side gear
• Clutch member thrust washer
• Clutch member
LH
NOTE: Do not install the clutch member spring.
• Clutch member RH with pinion gear
(h)
Install following parts onto the differential
case
cover.
• Adjusting washer
• Thrust washer No.
2
• Thrust washer No. 3
• Side gear
• Clutch member thrust washer
(i)
Temporarily assemble the selected thrust washers
together with the other " L'' dimension measured
parts
into the case.
NOTE: Do not assemble the spring.
(jl
Tighten the bolts to specified torque.
Torque: 650 kg-em (47 ft·lb. 64 N·ml
(k) Tum the side gears with the side gear shaft or other
means and check to see that they tum smoothly.
NOTE: Remove the snap ring from side gear shaft.
R""'lect thrust washers if the side gear
does
not tum
smoothly.
(I)
Disassemble the differential case.