Toyota Celica Supra 1986 Service And Repair Manual page 686

BODY -Moulding B0-17
REMOVAL OF QUARTER BELT MOULDING
1. APPLY ADHESIVE TAPE TO PROTECT BODY
2. REMOVE BELT MOULDING
(a) Insert the scraper and pry loose the clips facing rear·
ward.
(b) Pull the moulding forward and remove it.
INSTALLATION OF QUARTER BELT MOULDING
1. INSTALL CLIPS ONTO STUDS
Install the clips onto the studs.
2.
INSTALL BELT MOULDING
(a) Attach the upper edge of the moulding to the clips.
(b) Fit the lower edge of the moulding by pushing with
your hands.
{c) Connect the bolt moulding to the corner joint by sl id·
ing it
rearward.
REMOVAL OF QUARTER CORNER MOULDING
1. REMOVE QUARTER TRIM AND GARNISH
2. REMOVE CORNER MOULDING
{a) Remove tho sot screw.
(b) Remove t he moulding.