Toyota Celica Supra 1986 Service And Repair Manual page 39

ENGINE IIIIECHANICAL - Timin9 Belt EM-17
(g) Using SST to hold the pulley, install the bolt.
SST 09278-5401 2
Torque: 700 kg·cm (61 ft·lb, 89 N•ml
CAUTION: Oo not mako use of tho timing belt tension
when tightening tho bolt.
lhl Loosen the id ler pulley set bolt.
m
Turn the crankshaft clockwise two times.
ljl Retighten the idler pulley set bolt.
10. CHECK TIMING MARKS
tal Rotate the crankshaft two times clockwise.
lbl Check the timing marks. (Refer to the section of IN·
SPECTION AND ADJUSTMENT OF VALVE TIMING
- see page EM·
71
11. CHECK TIMING BELT TENSION
I See
ttep 10 on pogo EM-11 I
12. INSTALL CYUNDER HEAD COVER AND GASKET ON
EXHAUST SIDE
13. INSTALL OIL FILLER CAP
14. INSTALL NO. 3 nMING BELT COVER AND GASKET
16. INSTALL FLUID COUPLING WITH FAN SHROUD
16. INSTALL RADIATOR UPPER HOSE
17. INSTALL DRIVE BELTS
ISeo pogo MA-41
16. INSTALL AIR CLEANER CASE WITH AIR INTAKE
CONNECTOR
19. FILL WITH COOLANT
20. CONNECT CABLE TO NEGAnVE TERMINAL Of BATIERY