Toyota Celica Supra 1986 Service And Repair Manual page 412

FRONT AXLE AND SUSPENSION - Front Axle Hub FA·9
.....
If preload is less than specification, tighten the
nut •lightly and cheek again.
If preload is excessive, loosen the nut and, using
a
socket in your hand, retighten it
as
tight
as
possible.
Check the preload again.
(g)
Measure the hub axial play.
Limit:
0 .05 mm (0.0020 in.)
6. INSTALL LOCK CAP, COTTER PIN AND HUB
GREASE CAP
NOTE :
If
the cotter pin hole does not line up, cO<reet by
tightening the nut by the smallest amount possible.
7. INSTALL DISC BRAKE CALIPER
Install brake caliper on the disc. Torque the mounting
bolts.
Torque: 930 kg-em (67 ft·lb, 91 N.m)