Toyota Celica Supra 1986 Service And Repair Manual page 713

B0-44 BODY - Safety Pad
17. REMOVE FRONT PILLAR GARNISH
Pry loose the clips with a screwdriver, and pull the garnish
upward to remove
it.
18. REMOVE DEFROSTER NOZZLE GARNISH
Using a screwdriver, pry between the defroster nozzle
garnish and safety pad.
CAUTION: Be careful not to scratch the safety pad.
19. REMOVE SAFETY PAD
(a) Remove the seven screws and one bolt.
(b) Disconnect the lour connectors.
(c) Remove the Safety pad.
(d) Remove the left and right side defroster nozzle ducts.'
(e) Remove the instrument panel center register from the
safety
pad.
(f) Remove the left and right instrument panel side reg.
isters from the safety pad.
(g) Remove the side defroster retainer and delrouer
nozzle.
INSTALLATION OF SAFETY PAD
(See - 80-42)
INSTALL PARTS OF SAFETY PAD IN REVERSE
SEQUENCE OF REMOVAL
l