Toyota Celica Supra 1986 Service And Repair Manual page 187

30
Bolt
ltt~g'Chs
mm 60
COOLING SYSTEM - Water Pump
C().6
INSTALLATION OF WATER PUMP
(See
page CO.J)
1, INSTA L L WATER PUMP OVER NEW GASKET
Install the water pump over e r>ew gasket wi th eight bolts
and one nut.
2, INSTALL FAN BELTS. FAN BELT GUIDE AND
PULLEY
(a) Check the fan belto for cracks or damage.
I b) Place fen belts on the pulley, and position the pulley
and fen belt guide on the bolts of the water pump.
3. INSTALL FAN ON FLUID COUPLING
4. INSTALL FLUID COUPLING AND FAN SHROUD
(a)
Install the f an mroud together with the fluid coupling
to the engir>e compartment.
(b) Install the fluid coupling on the pu lley
with
four nuts.
(c) ln. n allthe four fan m roud bolts.
'------------~ - = "~'
5. INSTAL L A LTERNATOR ADJUSTING BAR
6. ADJUST FAN BELT TENSION
(See
page MA·4 )
7. CONNECT UPPER RADIATOR HOSE
8. INSTALL AIR CLEANER CASE
9, FILL WITH COOLANT
10. START ENGINE AND CHECK FOR LEA KS