Toyota Celica Supra 1986 Service And Repair Manual page 407

FA-4
FRONT AXLE AND SUSPENSION - Front Wheel Alignment
•
Front
A Inside
B Outside
Axis Incl ination
Camber
go•
fl1ftl:'lt•
Caster
4. ADJUST WHEEL ANGLE
5.
6.
Remove the caps of the knuckle stopper bolts and check
the steering angles .
Wheel engle:
Inside wheel
37"35'
t
2"
Outside wheel 30"
45'
(Reference)
NOTE: When the steering wheel is fully turned, make
sure that the wheel is not touching the body or brake
flexible hose.
If steering angles differ from standard value, adjust the
wheel angle with the knuckle stopper bolts.
Torque:
350
kg-em
(25 ft·lb, 34
N-ml
If the wheel angle still cannot be adjusted within limit~
inspect and replace any damaged or worn steering parts.
ADJUST CAMBER AND STEERING AXIS
INCLINATION
Camber:
lnspec1ion standard
50'. 45'
Left-right error
30'
Steering a>cis inclination:
Inspection s1llndard 10"10' . 45'
Laft·right error
30'
ADJUST CASTER
Caster:
Inspection standard
4"10'
±
45'
Adjustment standard
4° 10'
t
30'
Left·right error 30'
If caster is out of tolerance, adjust it at t he staked nuu
of the strut bar.
Torque:
1,050
kg-em (76 ft·lb,
103 N-m)
NOTE : Decrease caster by lengthening the strut bar.
Increase caster by shortening the strut bar. One turnofthl
n ut changes caster by 8'.
If caster still cannot be adjusted within limits, inspect and
replace damaged or worn front suspension pans.