Toyota Celica Supra 1986 Service And Repair Manual page 469

Atm
REAR AXLE AND SUSPENSION - IRS Type Rear Suspension
RA-47
5. INSTALL SHOCK ABSORBER
(a) Connect the shock absorber to the body with the
nuts. Hold the shaft with a screwdriver.
Torque the nut.
Torque: 250 kg·cm (18 ft·lb, 25 N.m)
(b) Connect the shock absorber to the rear suspension
arm with the bolt. Torque the bolt.
Torque: 375 kg-em (27 ft·lb, 37 N.m)
6. CONNECT STABILIZER BAR END TO REAR
SUSPENSION
Connect the cushion, retainer to the rear
SUSPension
arm
Link with the nut. Torque the nut.
Cushion
=--
Retainer
\
Torque: 180 kg·cm (13 ft·lb, 18 N.m)
7. INSTALL DRIVE SHAFT
Connect the drive shaft to the rear axle shaft with the
nuts.
Torque: 700 kg-em (51 ft·lb, 69 N .m)
8. INSTALL BRAKE HOSE CLIPS