Toyota Celica Supra 1986 Service And Repair Manual page 237

CL·8
MI:Jll
.....
CLUTCH - Clutch Unit
INSPECTION OF CLUTCH PARTS
1. INSPECT CLUTCH DISC FOR WEAR OR DAMAGE
Using calipers, measure the rivet head depth.
Minimum rivet depth: 0.3 mm (0.012 in.)
If a problem is found, repair or replace the clutch disc.
2. INSPECT CLUTCH DISC RUNOUT
Using a dial indlcator, c, h eck the disc runout.
Maximum runout: 0.8 mm (0.031 in.)
If runout is excessive, replace the disc.
3. INSPECT FL VWHEEL RUNOUT
Using a dial ondicator, check the flywheel runout.
Maximum runout: 0.2 mm (0.008 in.)
If runout is excessive, repair or replace the flywheel.
4. INSPECT PILOT BEARING
Turn the bearing by hand while applying force in the rotat·
ing
direction.
5. IF NECESSARY, REPL. A CE PILOT BEARING
(a) Using SST, remove the pilot bearing.
SST 09303·350 11