Toyota Celica Supra 1986 Service And Repair Manual page 671

80·2
BODY - Hood
HOOD
ADJUSTMENT OF HOOD
• For forward/rearward and left/right adjustments, loo.en
the bolts.
• For vertical adjuS1ment of the front edge of the hood,
turn
the
cushion.
• For vertical adjustment of the rear
edge
of tho hood,
loosen tho boiU.
ADJUSTMENT OF HOOD LOCK
ADJUST HOOD LOCK BY LOOSENING MOUNTING BOLTS
Hood Damper Stay
CAUTION: Handling tho damper.
(a) Do not di$8uemblo the damper bocaul8 the cylinder
is filled with gas.
(b) If the damper is damped, drill a 2.0- 3.0 mm (0.079
- 0.118 in.) hole in the bottom of the removed
damper cylinder to completely role- the high-pm·
sure gas.
(e) When drilling, chips may fly out so work carefully.
(d) The
gas
is eolori8SS, odorless and not poisonous.
(e) When working, handle the damper carefully. N-
score or scratch the exposed part of the piston rod.
and never allow paint or oil to get on it.
(f)
Do not turn the piston rod and cylinder with the
damper fully extended.
REMOVAL OF DAMPER STAY
1. REMOVE DAMPER STAY UPPER SIDE FROM
ENGINE HOOD
2. REMOVE DAMPER STAY LOWER SIDE FROM
FENDER APRON
INSTALLATION OF DAMPER STAY
1. INSTALL DAMPER STAY UPPER SIDE TO
ENGINE HOOD
2. CONNECT DAMPER STAY LOWER SIDE TO
FENDER APRON