Toyota Celica Supra 1986 Service And Repair Manual page 471

REAR AXLE AND SUSPENSION - IRS Type Rear Suspension RA-49
....
,.
3. INSTALL STABILIZER BAR BRACKET TO
DIFFERENTIAL SUPPORT MEMBER
Rear Suspension Arm
(SeepageRA-441
REMOVAL Of REAR SUSPENSION ARM
1. DISCONNECT STABI LIZER BAR FROM LOWER ARM
2. DISCONNECT REAR DRIVE SHAFT
3. REMOVE REAR AXLE SHAFT FLANGE
4 . REMOVE BRAKE DRUM OR DISC ROTOR
6.
REMOVE REAR AXLE SHAFT
6.
REMOVE BAC KING PLATE OR DUST COVER
7. DISCONNECT BRAKE LINE
8. DISCONNECT SHOCK ABSORBER FROM LOWER
ARM
9.
REMOV E COl L SPRING
10.
REMOVE REAR SUSPENSION ARM AND LOWER
CONTROL BUSHING
NOTE: Remember where the complete mark Is when
removing t he suspension arm.
(al Remove the two mounting bolts.
(bl Remove the
~ber
adjusting
~m.
(cl Remove the suspension arm.