Toyota Celica Supra 1986 Service And Repair Manual page 212

ST-4
\
STARTING SYSTEM - Starter
''""
DISASSEMBLY OF STARTER
(S..
page ST-31
1 . REMOVE FIELD FRAME WITH ARMATURE FROM
MAGNET1C SWITCH
(a) DiscOf'lneet the lead wire from the magnetic switch
terminal.
(b) Remove the two bolts. Pull out the field frame with
the armaturo from the magnetic switch .
(cl Remove the 0 -ring.
2 . REMOVE STARTER HOUSING FROM MAGNETIC SWITCH
ASSEMBLY
Remove the two screws and remove the starter housing.
3. REMOVE CLUTCH ASSEMBLY AND GEARS FROM
MAGNETIC SWITCH ASSEMBLY
4. REMOVE STEEL BALL
M191et Using a magnet, remove the steel ball from the clutch shaft
......
1100 11
hole .
6. REMOVE BRUSHES AND BRUSH HOLDER
(a) Remove the end cover from the field frame.
(b) Remove the O·ring
(c) Using a screwdriver, separate the brush and brush
spring, and remove the brush from the brush holder.
ldl Pull the brush holder off the armature.
8. REMOVE ARMATURE FROM FIELD FRAME
INSPECTION OF STARTER
Armature Coli
1. CHECK THAT COMMUTATOR IS NOT GROUNDED
Using an ohmmeter. check that there is no continuity be·
tween the commutator and armature coil core.
If there is continuity. replace the armature .