Toyota Celica Supra 1986 Service And Repair Manual page 351

•
AT-76 AUTOMATIC TRANSMISSION - Component Groups !Planetary Gear Output Shaft)
"'"
5 . REMOVE SNAP RING AND ONE-WAY CLUTCH FAOI
PLANETARY GEARS
6 . REMOVE NYlON THRUST WASHER FROM PLANETARY
GEARS
7. REMOVE APPlY TUBE AND CLUTCH PRESSURE PlAT(
8 . COMPRESS SHAFT SNAP RING AND REMOVE FRONT
PLANETARY RING GEAR
While pulling up the ring gear, compress the snap ring
will
snap ring pliers and pull out the ring gear by hand.
9 . REMOVE INTERMEDIATE SHAFT, RING GEAR
All)
PLANETARY GEAR FROM OUTPUT SHAFT ASSEMBlY
10. REMOVE THRUST BEARING AND RACES FROM OUTPUT
SHAFT ASSEMBLY
Not e the position of the races.
1 1. REMOVE THREE OIL SEAL RINGS FROM OUTPUT SHAfT
12. REMOVE STE. E L THRUST WASHER AND REAR PINION
GEARS FROM INTERMEDIATE SHAFT ASSEMBLY
13. REMOVE RACE AND THRUST BEARING FROM
INTERMEDIATE SHAFT
Note t he position of the race.