Toyota Celica Supra 1986 Service And Repair Manual page 472

RA-50
\
'
I
I
REAR AXLE AND SUSPENSION - IRS Type Rear Suspension
.....
REPLACEMENT OF REAR SUSPENSION
ARM BUSHING
1. CHECK ARM AND BUSHING
(a) Check the bushing for wear, cracks or deterioration.
(b) Check the arm for damage, cracks or deformation.
2. REPLACE INNER AND OUTER BUSHING
(a) Cut off the flange tip of the bushing as shown in !he
figure .
(b) Bend the remaining portions inward with a
cold
chisel.
NOTE: Be careful not to damage the flange.
(c) Bend in the flange t ips and pull off the flange wim a
pai r of pliers.
Bend the remaining flange portion so the SST can be
installed to the lower arm.
(d) Using SST, press out the outer bushing from the
atm.
SST 09710·22041
(09710-02040, 09710-02050. 09710-02050)