Toyota Celica Supra 1986 Service And Repair Manual page 263

MANUAL TRANSMISSION - W58 Transmission
MT·23
8 . MEASURE FIRST ANO SECOND GEAR THRUST
CLEARANCE
Using a feeler gauge, measure the 1st and 2nd gear thrust
clearance.
Standard clearance: 0 . 10 - 0.25 mm
(0.0039 - 0.0098 ln.l
9 INSTALL OUTPUT SHAFT TO INTERMEDIATE PLATE
lal Before installing the output shaft, use SST to remove
the counter gear center bearing outer race.
SST 09608·35014 (09608-06020, 09608-060901
NOTE: Install the outer race after installing the counter
gear.
(bl Install the output shaf t into the intermediate plate by
pulling on
the
output shaft and tapping on the inter·
mediate plate.
10. INSTALL INPUT SHAFT AND COUNTER GEAR
(a) Install the input shaft and counter gear together.
(bl Using SST, install t he counter gear center bearing out·
er race.
SST 09316-60010109316-00010, 09316.000701
NOTE: Be careful not t o damage the bearing rollers.