Toyota Celica Supra 1986 Service And Repair Manual page 354

AUTOMATIC TRANSMISSION - Component Groups (Planetary Gear Output Shaft)
14. TEMPORARILY INSTALL REACTION PLATE ON
PLANETARY
AT·79
Insert the plate into place for testing of the one-way clutch.
15. TEST ONE·WAY CLUTCH
The planetary gear must rotate freely counterclockwise and
lock clockwise.
If the clutch does not work correctly, it must be replaced.
16. REMOVE REACTION PLATE
17. INSTALL NYLON THRUST WASHER ON FRONT
PLANETARY CARRIER
Apply petroleum jelly to the washer to hold it in place dur·
ing later assembly. Match the lugs with the planetary
carrier.
18. INSTALL FRONT PLANETARY GEAR ASSEMBlY TO
INTERMEDIATE SHAFT
19. INSTALL PRESSURE PLATE
Install the pressure plate, facing the flat surface toward
the intermediate shaft.
20. INSTALL NO. 3 BRAKE CLUTCH PACK
Using low-pressure compressed air, blow all excess ATF
from discs.
CAUTION: Hlgl'l·preasure air will darnege tl\e discs.
Install in order: Disc·plate·disc-plate-disc·plate-disc·
plate-disc
21. KEEP INNER RACE, APPLY TUBE. THRUST BEARING AND
RACE TOGETHER