Set Lifetime Of Trap Message; Set Syslocation; Set Snmp Version - Huawei Quidway S3500 Series Operation Manual

Operation Manual - System Management
Quidway S3500 Series Ethernet Switches

5.3.5 Set Lifetime of Trap Message

You can use the following command to set lifetime of Trap message. Trap message that
exists longer than the set lifetime will be dropped.
Perform the following configuration in system view.
Table 5-6 Set the lifetime of Trap message
Set lifetime of Trap message
Restore lifetime of Trap message
By default, the lifetime of Trap message is 120 seconds.

5.3.6 Set SysLocation

The sysLocation is a management variable of the MIB system group, used for
specifying the location of managed devices.
You can use the following commands to set the sysLocation.
Perform the following configuration in system view.
Table 5-7 Set sysLocation
Set sysLocation
Restore the default location
of the Ethernet switch
By default, the sysLocation is specified as "Beijing China".

5.3.7 Set SNMP Version

You can use the following commands to set the Set SNMP Version.
Perform the following configuration in system view.
Table 5-8 Set SNMP Version
Set SNMP Version
Restore the default SNMP
Version of the Ethernet switch
Operation
Operation
Operation
Huawei Technologies Proprietary
snmp-agent trap life seconds
undo snmp-agent trap life
Command
snmp-agent sys-info location sysLocation
undo snmp-agent sys-info location
Command
snmp-agent sys-info version { { v1 | v2c | v3 } *
| all }
undo snmp-agent sys-info version { { v1 | v2c |
v3 } * | all }
5-5
Chapter 5 SNMP Configuration
Command