Checking The Configuration - Huawei NetEngine80E Configuration Manual - Reliability

HUAWEI NetEngine80E/40E Router
Configuration Guide - Reliability
The system view is displayed.
Step 2 Run:
peer-backup route-cost auto-advertising
The BRAS is configured to use default cost values of routes to control route preference when
the routes are generated. The route can be an address pool UNR or a route to a loopback interface
of the LAC on an L2TP tunnel.
----End
Follow-up Procedure
To use a routing policy to allow the UNR of the primary address pool to be the highest, run the
import-route unr route-policy route-policy-name command in the IS-IS, OSPF, or BGP view.
To persevere cost values of UNRs imported by a routing protocol, perform one of the following
steps based on the type of routing protocol:
l
l
l

11.4.10 Checking the Configuration

After the configuration is complete, you can view details about the remote server and the remote
backup service type, which is BRAS.
Context
Run the following commands to check the previous configuration.
Procedure
l
l
l
l
----End
Example
Run the display remote-backup-profile command to view information about the remote backup
profile, including the name of the remote backup service, name of the interface bound to a Virtual
Issue 02 (2014-09-30)
Run the import-route unr inherit-cost command in the IS-IS view.
In the OSPF view, run the following commands:
1. default cost inherit-metric
2. import-route unr
Run the import-route unr command in the BGP view.
Run the display remote-backup-profile profile-name command to check information
about the remote backup profile.
Run the display remote-backup-service [ service-name [ verbose ] ] command to check
information about the remote backup service.
Run the display backup-user [ user-id user-id | username user-name ] command to check
information about backup users.
Run the display access-user interface interface-type interface-number [ normal | [ rui-
local | rui-remote ] [ master | slave ] ] command to check information about the access
users on a specified interface.
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
11 Multi-node Backup Configuration
1158