Enabling The Function Of Saving Nqa Test Results Through Ftp; Optional) Configuring The Number Of Test Results Saved Through Ftp - Huawei AR150/200 Series Configuration Manual

Huawei AR150&200 Series Enterprise Routers
Configuration Guide - Network Management
The system view is displayed.
Step 2 Run:
nqa-ftp-record ip-address ip-address
or
nqa-ftp-record vpn-instance vpn-instance
The IP address of the FTP server is configured.
Step 3 Run:
nqa-ftp-record username username
The user name for logging into the FTP server is configured.
Step 4 Run:
nqa-ftp-record password password
The password for logging into the FTP server is configured.
Step 5 Run:
nqa-ftp-record filename filename
The file name used for saving test results is configured.
----End
6.17.3 Enabling the Function of Saving NQA Test Results Through
FTP
The system can send test results to the FTP server only after the FTP server is enabled with the
test result saving function.
Context
Do as follows on the NQA client:
Procedure
Step 1 Run:
system-view
The system view is displayed.
Step 2 Run:
nqa-ftp-record enable
The FTP server is enabled to save test results.
----End
6.17.4 (Optional) Configuring the Number of Test Results Saved
Through FTP
This part describes how to configure the number of test results that an FTP server can save.
Issue 02 (2012-03-30) Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
6 NQA Configuration
193