Preparation Of Function Key Name Sheet (Available In The F930Got-K) - Mitsubishi Electric F920GOT-K Hardware Manual

GOT-F900 SERIES (CONNECTION)
4.8.2

Preparation of Function Key Name Sheet (Available in the F930GOT-K)

This section explains how to prepare the function key name sheet.
1) Preparing the name sheet
a) Make the mount sheet in reference to the following dimensions and prepare an OHP sheet
(transparent and colorless sheet).
b) Write down the names of the switches used on the mount sheet.
Function key
Note: The shaded parts indicate the effective range for characters.
c) When the work in b) is completed, copy the contents of the name sheet base on an OHP sheet in
the actual dimensions (100%) using a copy machine.
When using a different OHP sheet, use the following type. Make sure that the selected OHP
sheet can be used in a copy specification.
[Recommended OHP sheet]
Material: Polyester film
Thickness: 0.1mm (0.004")
2) Attaching the sheet
Insert it into the following position shown below of the F930GOT-K.
Function key
Installation and Wiring of F920GOT-K/F930GOT(-K)/F940(W)GOT 4
143(5.63")
23(0.91") 8 23(0.91") 8
(0.31") (0.31")
3(0.12")
Front panel
23(0.91") 23(0.91")
8
(0.31")
Unit: mm(inch)
Rear panel
Insert
COM1 COM0
RS232C RS422
6(0.24")
C2(0.08")
Insertion
direction.
C2(0.08")
Label
4-21
1
2
3
4
5
6
7
8
9
10