Remove the old protective sheet from the GOT if the sheet is attached, and
clean the GOT surface.
Remove the release paper from the back of a new protective sheet. Do not
remove the protective film. Position the sheet hole to the USB
environmental protection cover on the GOT, and attach the sheet adhesive
For attaching the protective sheet, make sure to fit the sheet on the GOT
without wrinkles or air between the sheet and the GOT.
Remove the protective film from the protective sheet.
When the user continues using the GOT with the protective film, the film
may not be removed.
7.3.2 Installation procedure
Replacement time of protective sheet
Check the status of the protection sheet visually by to the daily inspection.
The visibility becomes worse when there is too much dirt and cracks, causing
malfunction. Proceeds replacement promptly.