CF Card Unit and CF Card Extension Unit
The section explains how to install the CF card unit or the CF card extension unit on the GOT.
The following is an example of installing the CF card unit.
For installing the CF card extension unit, install the GOT side installation unit on the GOT with the same
(1) Installing on GOT
Power off the GOT.
Remove one extension unit covers of the GOT and fit the CF card unit in the GOT case.
Fasten the CF card unit by tightening its mounting screws (2 places) with tightening torque 0.36
7.2 Option Unit
7.2.2 Installing procedure
Installation and removal precautions
• Extension units cannot be installed on the CF card unit and the CF card
For installing extension units, install the CF card unit or the CF card
extension unit at the last.
• When installing the CF card unit on extension interface 1 (left side), do not
install more units on extension interface 2 (right side) than on extension
interface 1 (left side).
If doing so, the CF card cannot be installed or removed.
• For removing the CF card unit or the CF card extension unit, tilt PULL of the
unit and remove the unit so as not to break the connector.
• The CF card unit cannot be used with the CF card extension unit. For
details, refer to the following.
Appendix 5 How to Choose Drive