Installing To/Removing From Panel - Mitsubishi Electric GOT2000 Series User Manual

6.8.4

Installing to/removing from panel

■1. Installing the Connector Conversion Box (GT16H-CNB-42S) on the panel
(1) Configuration
The following shows the configuration of when the GOT is used by attaching a Connector Conversion Box to the
control panel or operation panel.
Handy GOT
1) External cable (Connector Conversion Box connection side 42 pins)
2) PLC connection cable
3) Connector Conversion Box
Select the cable according to the communication method and controller.
For the cable selection, refer to the following.
➠
GOT2000 Series Handy GOT Connection Manual For GT Works3 Version1
(2) Panel cutting dimensions for Connector Conversion Box
The Connector Conversion Box can be installed on the panel face directly or with mounting bracket offered as an
accessory.
For details on installing procedure and panel cutting dimensions, refer to the following.
➠ 7.1 Connector Conversion Box
1）
Name
Control panel or
operation panel
PLC
3）
2）
Cable
GT16H-C30-42P
GT16H-C60-42P
GT16H-C100-42P
Select or prepare appropriate cables for the
communication method and controllers.
GT16H-CNB-42S
6.8 Handling Handy GOT
6
6 - 49