Installation Of Bootos And Basic System Application - Mitsubishi Electric GOT2000 Series User Manual

7. INSTALLATION OF BOOTOS AND BASIC SYSTEM APPLICATION

To execute the GOT utility, install the BootOS and system applications on the C drive (built-in flash memory) of the GOT, or
set the boot drive of the system application to [A: Built-in SD card] and insert an SD card with system applications into the
GOT.
(BootOS is installed in the GOT at factory shipment. It is not necessary to install BootOS when upgrading of it is
unnecessary.)
This chapter explains the installation using GOT.
GT Designer3 → Data storage → GOT
GT Designer3
Set the OS boot drive to
[A: 標準SDカード].
GOT → Data storage → GOT
GOT
*1 When execute installation with a USB memory, the system applications have to be installed in GOT in advance.
Refer to the following for the installation which uses GT Designer3.
➠
GT Designer3 (GOT2000) Screen Design Manual
Write
BootOS or system
system
application installation
application
Install the SD
*1
card in GOT
Data storage
Write
Install the SD
SD card
system
card in GOT
application
System
BootOS or system
application
application installation
upload
*1
Install a data storage
Data storage
GOT
GOT
GOT
in the GOT.
When GOT is remote,
installed easily using
a data storage
The GOT can starts without a
system application installed.
Install from GOT to GOT
using a data storage.
7 - 1
7