This section explains operations for installing the communication driver and OS in the
GOT as preparation before monitoring.
This section explains with an example.
The GOT does not include the monitor OS for monitoring or the driver for
Therefore, it is necessary to perform this operation only once before the first
It is not necessary after the first time. However, when the OS is updated or the
communication method is changed, this operation is required. (Installation is
completed on the training machine, so overwriting is necessary.)
Click on the [Communication] – [To/From
When the dialog box appears, click the [OS
installation → GOT] tab.
Select the standard monitor OS.
The standard monitor OS is a program that
performs monitor function control.
Select the communication driver.
communication between the GOT and the
corresponding to the connection type.
Check the "Q BUS" in the "BUS/network
Group" of the "communication driver".
Click the Install button.
4 - 20