Bootos And Standard Monitor Os Required For Installation - Mitsubishi Electric GT1695M-XTBD User Manual

14.1 BootOS and Standard Monitor OS Required for
Installation
Under-mentioned BootOS and Standard monitor OS are necessary to execute utility.
OS name
Requied for the control of GOT and the communication between PC and GOT.
Installed at factory shipment.
(BootOS can be installed from GT Designer2 or the CF card. When installed
BootOS
from GT Designer2 or the CF card, GOT is initialized to be the factory shipment
status. Standard monitor OS must be pre-installed in the GOT when installing
the BootOS again.)
Required for the GOT operation as the
monitoring function of GOT, installation and
deletion of the OS file or project data, touch
key control or display function of the screen
and guidance.
Standard
System screen data
monitor
System screen management information file
OS
TrueType numerical font
12-dot standard font (Gothic)
16-dot standard font (Mincho)
16-dot standard font (Gothic)
14

14.1 BootOS and Standard Monitor OS Required for Installation

- 2
Function overview
Required for display and
operation of the user-created
screen and utility screen.
Not installed in GOT at factory
shipment.
Install it from GT Designer2 or
the CF card or USB memory.
At installation, select [Mincho]
or [Gothic] for the 16-dot
standard font.
Storage location
Built-in flash memory
C: \G1BOOT\
CF card that stores data
with the OS boot drive
set to the A drive
A:\G1BOOT\
Built-in flash memory
C:\G1SYS\
CF card that stores data
with the OS boot drive
set to the A drive
A:\G1SYS\