Switch Wiring; Overview For Switch - Mitsubishi Electric GOT2000 Series User Manual

9.4

Switch Wiring

9.4.1

Overview for switch

Operation switch display LED
No. Name
1) Operation switch (6 switches)
2) Emergency stop switch
3) Grip switch
4) Keylock switch (2-position SW)
■1. Switch
The following switches require the connection to a PLC or a controller through an external cable.
• Operation switch
• Emergency stop switch
• Grip switch
• Keylock switch (2-position SW)
■2. LED
The following LED is turned ON/OFF in the serial communication with a controller.
The independent wiring to control the LED is not required.
• Operation switch display LED
• Grip switch display LED
9 - 10

9.4 Switch Wiring

2)
1)
Abbreviations
SW1 to SW6
ES-1, ES-2, ES-3
DSW-1, DSW-2
KSW-1, KSW-2
4)
3)
Grip switch display LED
Switch for external direct wiring (independent contact)
Switch for external direct wiring (independent contact)
Switch for external direct wiring (independent contact)
Switch for external direct wiring (independent contact)
Specifications