Show Location - Siemens SCALANCE X-400 Operating Instructions Manual

Installation and Commissioning
6.10

Show Location

Determining the Location of a SCALANCE X-400
To identify a SCALANCE X414-3E locally and with certainty, you can use the
"show location" function on a programming device to select the node over the net-
work and make it flash. This can be used, for example, when assigning addresses
to make sure that the correct node receives the address. All port LEDs of the ad-
dressed node flash green at 2 Hz.
With the PST Tool V3.0, you can trigger this function with Module \ Ring .
For more detailed information, refer to the Configuration Manual
SCALANCE X-400 , chapter Working with the Primary Setup Tool , section Deter-
mining the location of a device .
118
Operating Instructions for SCALANCE X-400 Industrial Ethernet Switches
C79000-G8976-C186-03