Configuration; System; The "Show" Commands; Show Cli-Console-Timeout - Siemens SCALANCE XM-400 Configuration Manual

Configuration

This part contains the sections that describe the following:
● System settings
● Saving / loading configurations and firmware
3.1

System

This section describes commands with which general system properties can be displayed
and configured.
3.1.1

The "show" commands

This section describes commands with which you display various settings.
3.1.1.1

show cli-console-timeout

Description
This command shows the global configuration for the timeout of the CLI console.
Requirement
You are in the User EXEC mode or in the Privileged EXEC mode.
The command prompt is as follows:
cli>
Syntax
Call the command without parameters:
show cli-console-timeout
Result
The configuration for the timeout is displayed.
SCALANCE XM-400/XR-500 Command Line Interface
Configuration Manual, 05/2014, C79000-G8976-C252-07
or
cli#
3
41