Show Monitor Barrier; Show Monitor Session - Siemens SCALANCE XC-200 Configuration Manual

Diagnostics
12.5 Port Mirroring
Syntax
Call the command without parameters:
show monitor
Result
The status of the port mirroring function is displayed.
12.5.1.2

show monitor barrier

Description
This command shows the status of the communication via the monitor port. If you enable this
option, management of the switch via the monitor port is no longer reachable.
Requirement
You are in the User EXEC mode or in the Privileged EXEC mode.
The command prompt is as follows:
cli> or cli#
Syntax
Call the command without parameter assignment:
show monitor barrier
Result
The settings are displayed.
12.5.1.3

show monitor session

Description
This command shows the settings used for mirroring ports.
You obtain information about the ports from which incoming and/or outgoing data traffic is
mirrored and the port at which the mirrored data is output.
Requirement
You are in the User EXEC mode or in the Privileged EXEC mode.
The command prompt is as follows:
588
SCALANCE XB-200/XC-200/XF-200BA/XP-200/XR-300WG Command Line Interface
Configuration Manual, 07/2017, C79000-G8976-C361-06