Requirement
You are in the User EXEC mode or in the Privileged EXEC mode.
The command prompt is as follows:
cli> or cli#
Syntax
Call the command without parameters:
show users
Result
The logged-in CLI users are displayed.
11.1.1.3
show user-accounts
Description
This command shows the created users.
Requirement
You are in the Privileged EXEC mode.
The command prompt is as follows:
cli#
Syntax
Call the command without parameters:
show user-accounts
Result
The created users are shown.
11.1.2
change password
Description
With this command, you change the password of the logged in user.
SCALANCE XB-200/XC-200/XF-200BA/XP-200/XR-300WG Command Line Interface
Configuration Manual, 07/2017, C79000-G8976-C361-06
Security and authentication
11.1 User management
499