Ring Redundancy - Siemens SIMATIC NET SCALANCE SC-600 Configuration Manual

Configuring with Web Based Management
4.3 "Information" menu
• Invalid Messages
Number of invalid messages that were transferred by the synchronization partner.
• Reset Counters
Click this button to reset the counters on this page.
Refresh
Refreshes the display of the values. The result is shown in the table.
4.3.11.4

Ring redundancy

Information on ring redundancy
On this page, you obtain information about the status of the device in terms of ring
redundancy. The text boxes on this page are read-only.
Description of the displayed values
The table has the following columns:
• Redundancy Function
The "Redundancy Function" column shows the role of the device within the ring:
– No Ring Redundancy
– HRP Client
– MRP Client
• Ring Port 1/Ring Port 2
The "Ring Port 1"and "Ring Port 2" columns show the ports being used as ring ports.
If media redundancy in ring topologies is completely disabled, ring ports configured
last are displayed.
102
The device is operating without redundancy function.
The device is operating as HRP Client.
The device is operating as MRP Client.
SCALANCE SC-600 Web Based Management (WBM)
Configuration Manual, 10/2021, C79000-G8976-C475-03