Show Ring-Redundancy; Show Ring-Redundancy Manager Counters - Siemens SCALANCE XC-200 Configuration Manual

Syntax
Call the command without parameters:
show linkcheck
Result
The current information is displayed.
8.4.4.3

show ring-redundancy

Description
With this command, you show the current configuration of the ring redundancy and standby
functions.
Requirement
You are in the User EXEC mode or in the Privileged EXEC mode.
The command prompt is as follows:
cli> or cli#
Syntax
Call the command without parameters:
show ring-redundancy
Result
The current configurations are displayed.
8.4.4.4

show ring-redundancy manager counters

Description
With this command, you display the following information:
● How often the device as redundancy manager switched to the active status, i.e. opened its
blocked port because it no longer receives its sent RM frames.
● The maximum delay time of the test frames of the redundancy manager.
Requirement
You are in the User EXEC mode or in the Privileged EXEC mode.
SCALANCE XB-200/XC-200/XF-200BA/XP-200/XR-300WG Command Line Interface
Configuration Manual, 07/2017, C79000-G8976-C361-06
Layer 2 management protocols
8.4 Ring redundancy and standby connection
393