Show History - Siemens SCALANCE XM-400 Configuration Manual

General information
2.7 General CLI commands
2.7.4.7

show history

Description
This command shows the last 14 commands you entered.
The commands are listed in the order in which they were called up. The
command is listed as the last command to be entered.
The list depends on the mode. In the Global configuration mode, the last 14 commands
entered in this mode are displayed. These commands are not included in the list of the
Interface configuration mode.
Requirement
You are in the User EXEC mode or in the Privileged EXEC mode.
The command prompt is as follows:
cli>
Syntax
Call the command without parameters:
show history
Result
The list of used commands is displayed.
40
or
cli#
SCALANCE XM-400/XR-500 Command Line Interface
Configuration Manual, 05/2014, C79000-G8976-C252-07
show history