Rip Commands; Introduction - Allied Telesis AT-x510-28GTX Command Reference Manual

24

Introduction

Overview This chapter provides an alphabetical reference of commands used to configure
RIP.
For information about configuring RIP, see the
Configuration
Command List •
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
C613-50102-01 REV C
Guide.
"accept-lifetime" on page 814
"alliedware-behavior" on page 816
"cisco-metric-behavior
"clear ip rip route" on page 819
"debug rip" on page 820
"default-information originate
"default-metric (RIP)" on page 822
"distance (RIP)" on page 823
"distribute-list (RIP)" on page 824
"fullupdate (RIP)" on page 825
"ip rip authentication key-chain" on page 826
"ip rip authentication mode" on page 828
"ip rip authentication string" on page 831
"ip rip receive-packet" on page 833
"ip rip receive version" on page 834
"ip rip send-packet" on page 835
"ip rip send version" on page 836
"ip rip send version 1-compatible" on page 838
Command Reference for x510 Series
AlliedWare Plus™ Operating System - Version 5.4.6-1.x

RIP Commands

RIP Feature Overview and
(RIP)" on page 818
(RIP)" on page 821
812