Table of Contents
Advertisement
P
C
C
LUGGABLES AND
ABLING
OMMANDS
SHOW SYSTEM PLUGGABLE DIAGNOSTICS
show system pluggable diagnostics
Overview
This command displays diagnostic information about SFP and SFP+ pluggable
transceivers that support Digital Diagnostic Monitoring (DDM).
Different types of pluggable transceivers are supported in different models of
device. See your device's Datasheet for more information about the models of
pluggables that your device supports.
For information on filtering and saving command output, see the
with AlliedWare Plus" Feature Overview and Configuration
show system pluggable [<port-list>] diagnostics
Syntax
Mode
User Exec and Privileged Exec
Usage
Modern optical SFP and SFP+ transceivers support Digital Diagnostics Monitoring
(DDM) functions.
Diagnostic monitoring features allow you to monitor real-time parameters of the
pluggable transceiver, such as optical output power, optical input power,
temperature, laser bias current, and transceiver supply voltage. Additionally, RX
LOS (Loss of Signal) is shown when the received optical level is below a preset
threshold. Monitor these parameters to check on the health of all transceivers,
selected transceivers or a specific transceiver installed in a device.
Examples
To display detailed information about all pluggable transceivers installed on a
standalone device, use the command:
awplus#
C613-50103-01 REV A
Parameter
Description
<port-list>
.
The switch ports or ports to display information about (e.g.
port1.0.25 or port1.0.25-1.0.26)
show system pluggable diagnostics
Command Reference for x310 Series
AlliedWare Plus™ Operating System - Version 5.4.6-1.x
"Getting Started
Guide.
300
Advertisement
Table of Contents
