Rip Commands; Introduction; Chapter 21: Rip Commands - Allied Telesis CentreCOM GS948MPX Command Reference Manual

21

Introduction

Overview This chapter provides an alphabetical reference of commands used to configure
RIP.
For information about configuring RIP, see the
Configuration
Command List •
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
C613-50181-01 Rev B
Guide.
"accept-lifetime" on page 667
"alliedware-behavior" on page 669
"cisco-metric-behavior
"clear ip rip route" on page 672
"debug rip" on page 673
"default-information originate
"default-metric (RIP)" on page 675
"distance (RIP)" on page 676
"distribute-list (RIP)" on page 677
"fullupdate (RIP)" on page 678
"ip rip authentication key-chain" on page 679
"ip rip authentication mode" on page 681
"ip rip authentication string" on page 684
"ip rip receive-packet" on page 686
"ip rip receive version" on page 687
"ip rip send-packet" on page 688
"ip rip send version" on page 689
"ip rip send version 1-compatible" on page 691
Command Reference for GS900MX Series
AlliedWare Plus™ Operating System - Version 5.4.7-1.x

RIP Commands

RIP Feature Overview and
(RIP)" on page 671
(RIP)" on page 674
665