Show System Pluggable - Allied Telesis x310-26FT Command Reference Manual

P C C
LUGGABLES AND ABLING OMMANDS

SHOW SYSTEM PLUGGABLE

show system pluggable
Overview This command displays brief pluggable transceiver information showing the
pluggable type, the pluggable serial number, and the pluggable port on the
device. Different types of pluggable transceivers are supported in different models
of device. See your Allied Telesis dealer for more information about the models of
pluggables that your device supports.
show system pluggable [<port-list>]
Syntax
Mode User Exec and Privileged Exec
Example To display brief information about all installed pluggable transceivers, use the
command:
awplus#
Example To display brief information about pluggable transceivers installed in port1.0.25
through port1.0.26, use the command:
awplus#
Output Figure 7-3:
System Pluggable Information
Port Manufacturer
--------------------------------------------------------------------------------
1.0.25 AGILENT
1.0.26 AGILENT
--------------------------------------------------------------------------------
Table 8: Parameters in the output from the show system pluggables command
C613-50103-01 REV A
Parameter Description
<port-list>
.
The switch ports or ports to display information about (e.g.
port1.0.25 or port1.0.25-1.0.26)
show system pluggable
show system pluggable port1.0.25-1.0.26
Example output from show system pluggable port1.0.25-1.0.26
Device
HFBR-5710L
QBCU-5730R
Parameter
Stack member
Port
Vendor Name
Command Reference for x310 Series
AlliedWare Plus™ Operating System - Version 5.4.6-1.x
Serial Number
0401312315461272 040131
AK0614GKF7
Description
The stack member number.
Specifies the vendor's name for the installed pluggable
transceiver.
Specifies the vendor's name for the installed pluggable
transceiver.
Datecode Type
1000BASE-SX
060408 1000BASE-T
295