Table of Contents
Advertisement
2.3. Securing the robot
General
This section describes how to secure the robot using the transport support.
DANGER!
Releasing the brakes is a hazardous action that may cause injury and damage property. It must
be done with great care and only when absolutely necessary.
Securing the robot
xx0800000062
3HAC022033-001 Revision: E
Action
1. Mount the transport support lower end to the
robot using the recommended screw joint, (A)
in figure.
2 Installation and commissioning
2.3. Securing the robot
Note
Do not tightening the screw.
See attachment point for the specific
robot in section
Transport position with
a transport support on page
Continues on next page
45.
49
Advertisement
Table of Contents
