ABB IRB 7600 - 500/2.55 Product Manual page 293

Required equipment
Equipment, etc.
Press tool, balancing device
Hydraulic cylinder
Hydraulic pump, 80 MPa
Standard toolkit
Using the correct press device
The different designs of the balancing device require different versions of the press device,
included in the complete press tool. The table below specifies which press device to use to
which balancing device.
The article number of the balancing device may be found on a label at the rear of the balancing
device.
Balancing device
xx0300000605
Art. no: 3HAC14675-2
xx0700000423
Art. no: 3HAC023018-001
3HAC022033-001 Revision: E
4.5.5. Unloading the balancing device
Art. no. Note
3HAC020902-001 Includes
•
•
Choose the correct device, depending
on model of balancing device.
3HAC11731-1 To be used with the press tool.
3HAC13086-1 To be used with the hydraulic cylinder.
- The content is defined in section
Standard toolkit on page
Press device
xx0300000600
Art. no: 3HAC15767-2 (for balancing
device 3HAC14675-1)
xx0300000599
Art. no: 3HAC18100-1 (for balancing
device 3HAC023018-001)
4 Repair
Continued
press device 3HAC15767-2
press device 3HAC18100-1
394.
Continues on next page
291