Rust Preventive Measures, Bearing Axis 4 (Foundry Prime) - ABB IRB 7600 - 500/2.55 Product Manual

3.5.3. Rust preventive measures, bearing axis 4 (Foundry Prime)

Overview
The bearing axis 4 is located as shown in the illustration below.
xx0500002869
A
B
Required equipment
Equipment
Brush
Rust preventive
Standard toolkit
Other tools and procedures
may be required. See
references to these
procedures in the step-by-
step instructions below.
Procedure
The procedure below details how to grease the bearing axis 1.
3HAC022033-001 Revision: E
3.5.3. Rust preventive measures, bearing axis 4 (Foundry Prime)
Plastic cover
Plastic ring
Action
1. Put the robot in a suitable position.
2.
DANGER!
Turn off all electric power, hydraulic and
pneumatic pressure supplies to the
robot!
For Foundry Prime robots: Do not turn
off the air pressure to motors and SMB.
Art. no.
-
3HAC026621-001
Note
3 Maintenance
Note
Equivalent:
• Mercasol 3106
The content is defined in
section Standard toolkit on
page 394.
These procedures include
references to the tools
required.
Continues on next page
207