Table of Contents
Advertisement
3HAC022033-001 Revision: E
2.5.5. Manually releasing the brakes, external brake release unit
Action
4.
DANGER!
When releasing the holding brakes, the robot axes
may move very quickly and sometimes in unexpected
ways! Make sure no personnel is near the robot arm!
5. Release the holding brake of each robot axis by
pressing the respective button on the external brake
release unit.
6. Disconnect the external brake release unit.
7. Refit the rear cover plate with its attachment screws.
2 Installation and commissioning
Note
Continued
77
Advertisement
Table of Contents
